- Sun Feb 20, 2005 5:53 pm #6853
Using both the old and the new technologies of barreled carborators and the new fuel injection systems can be optimized and the RPM maximized in any Engine with a very cheap and easy to add high PSI exhaust suction compressor which will add the power to do the opposite action that the fuel coming in does. We are done with the technology of fuel coming in but, we havn't tackled the problem of removing the wasted fuel. If we simply pull the fuel out as fast as we can then the pistons in the cylinders can move much faster creating more RPM's which when attached to the generator creats more generated electricity to charge the battery so we loose no power or fuel or milage with use. We just gain maximum performance from all vehicles with an added compressor to suck out the cylinders on the stroke to push it out. We will suck it out faster than it can be pushed which moves the pistons faster and everything else is improved when this action takes place the whole engine system works better, faster, and cheaper. A win/win situation where you need only add a part rather than alter the engine. This will work better than any exhaust system or fuel additive by far. This should be on all cars especially the fuel economical cars with limited power. Having the power to maneuver through traffic and to get out of trouble is a safety concern as well. This will help out any vehicle in many was that I have described and will be used to advance all cars in the future. I am sure full performance from the entire car and every part in it will be optimized.